Leifheit pole holder/hanger

Holder for 2 poles.

• Pole has 24.3mm, holder has 25mm of space.
• Pole maximal diameter (that is somewhere in the middle of the pole) is 40mm. 2 poles fit beside each other without interference. 
• Small raised parts keep poles from sliding out. 

The poles are further from the attachment (wall) surface for easier grip, and so I can fit drying rack below. 

Holder is attached by command strips. I used 2 smaller and 1 larger. Holes in the base are for the tabs, so unsticking will be easier. 

Print:

• no supports
• PLA
• Increased infill ratio in the arm section (see sliced 3mf file with modifier)