Bounce fabric softener wall mount

I wanted to get the fabric sheet box off the shelf, so I made a box that would mount on the wall and hold the Bounce fabric sheets. You can put the whole box in or you could put just the fabric sheets from the box directly into it. I have not tested other brands for fit so the measurement may vary. If needed, you could upscale it if your brand is a little larger.

I printed this without any supports. Fans were at 100% using the Minimus Cooling Mod.

https://www.thingiverse.com/thing:5800381

Printer: Ender3 v2  (0.6mm Nozzle)

Bed: 50 Deg.

Hotend: 215 Deg.

Support: No

Brim: No

Filament used : Sunlu PLA