T-Beam Supreme case for Meshtastic

**You can purchase this case and others already printed:**

US customers can purchase from QuantumShadow3D
(https://www.etsy.com/shop/QuantumShadow3D)

UK/EU customers can purchase from 3DChicken
(https://www.3dchicken.co.uk)
 

These models are intended for personal use only.
DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission.

Anyone interested in licensing this design for non-commercial (i.e. private) sale can message me here to discuss.  Please respect the Creative Commons license restrictions I have chosen (http://creativecommons.org/licenses/by-nc-nd/4.0/) and I encourage anyone who sees my designs for sale contact me.

With all that said, now on to the models…
 

Update 31-December-2023:

• Added button-tighter-fit model in case the original button is too small for the holes
• Uploaded a 0.5mm thick window shim part for use with 1mm thick acrylic windows, if 1.5mm thick acrylic cannot be found
• Added an assembly guide in the pictures

This is a case for the T-Beam Supreme boards, designed with the Meshtastic project in mind (https://meshtastic.org).

There are five models required for a complete case, as well as socket head cap screws and a SMA antenna pigtail cable (included with the T-Beam Supreme); refer to the parts list below.

Required hardware:

1. Four (4) M3x20mm socket head cap screws
2. Four (4) M3 nuts
3. Two (2) M2x12mm screws
4. Two (2) M2 nuts
5. Battery: 18650 cell

Optional hardware:

1. One (1) M2x10mm screw (if using TPU button cover)
2. One (1) M2 nut (if using TPU button cover)
3. Laser-cut acrylic window (see note below)

Minimum required model files:

1. T-Beam_Supreme_back-18650
   +OR+ T-Beam_Supreme_back-18650-flat (has flat edge for stability)
   +OR+ T-Beam_Supreme_back-21700-flat (requires desoldering 18650 battery holder)
   +OR+ T-Beam_Supreme_back-21700-flat (has flat edge for stability)
2. T-Beam_Supreme_front-<pattern>
   +OR+ T-Beam_Supreme_front-noinsert-<pattern> (if not using a laser-cut acrylic window)
3. T-Beam_Supreme_frame-button-cover (if using TPU button cover)
   +OR+ T-Beam_Supreme_frame-no-button-cover (if not using TPU button cover)
4. T-Beam_Supreme_button
5. T-Beam_Supreme_button-dust-cover (optional, print in TPU)

I've also included the SVG file for an optional laser-cut acrylic window using 1mm or 1.5mm acrylic.  If you want one but don't have a laser cutter I sell them on my Etsy store.