Paper Hanger - 4.25"

Everyone needs one :-) Design include standoffs on the back to have a proper glue line to the wall via adhesive/mortise compound. Alternatively, mounting via a pair of #10 FH screws is provided. Be sure to print the holder as shown in the pictures. It might be fun to print the holder using ‘glow-in-the-dark’ filament. The axle can be printed in halves using a slicer provided connector or a 1.5" long piece of .304" diameter dowel (I used a wooden one). The axle could of course be round instead of septagonal. Septagonal would allow one to print the axle whole, laying down, with the proper support on the spindle ends and of course the required cleanup.