Mantic Armada Island Terrain - Large Islands

Mantic Games have made their 3D printable island terrain available in their MMF Campaign of 3D printed models. I looked at the pictures and was underwhelmed at what they would look like, so I started designing my own by looking at the downloadable token sheets. They reached the stretch goal and I was right... They don't look good to me, so I am glad I made these.

These are Large Islands for use with Mantic Games Armada. Other items will come later (As I make them).

There is three different variations in total.

I have added a screen grab of my TinkerCad model with parts in a general colour. You can use this as a guide to painting your final print if you wish.

There are Small and Medium Rocky Islands and also Medium Sandbanks available.

I have no photos for physical prints yet, as I have run out of filament and will not be getting any until the end of October. I will then print the models and upload them here. This means the models are untested at the moment, so I don't know if they will work as intended until I print them.

I primarily made these for use with their MMF Campaign of 3D printed models, but they are the same scale as the physical shop bought models, so should work with those too.

I hope you like them.

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you.

Printing Instructions:

I printed these on my Ankermake M5 printer with Ankermake slicer v0.9.44_6 (Other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.1 (Initial Layer @ 0.2)

Nozzle: 0.4mm

Print Speed: 250mm/s (Initial layer @ 50mm/s)

Nozzle Temperature: 230 Degrees (Initial layer @ 230 Degrees)

Bed Temperature: 65 Degrees (Initial layer @ 75 Degrees)

Infill: 10%

Supports: No

Skirt: Yes - x4

Brim: No

Raft: No

Enjoy your prints.

                           https://www.buymeacoffee.com/tigertone