Pumpkin Wall Art (made w/ HueForge)

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

PLA Sunlu Black Transmission Distance: 0.6

PLA PolyLite Army Green Transmission Distance: 1.8

PLA Sunlu Orange Transmission Distance: 2.7

PLA Elegoo Yellow Transmission Distance: 3

PLA Sunlu White Transmission Distance: 5.8

Swap Instructions:

Start with Black

At layer #17 (0.84mm) swap to Army Green

At layer #21 (1mm) swap to Orange

At layer #29 (1.32mm) swap to Yellow

At layer #34 (1.52mm) swap to White for the rest.

Category: 2D Art