Spooky LED Ghost (Koenigsegg)

The Koenigsegg Ghost with LEDs behind his eyes.

I used some leftover milk acrylic sheet behind the eyes to spread the light from a standard 5mm red LED.

Parts list:

• 1x 5mm red LED
• 1x 50-100 Ohm resistor
• 1x TP4056 Battery charging module
• 1x Li-ion Battery
• 1x 3.3v LDO regulator (AP2112K-3,3)

Printed at .2mm Layer height with surface ironing enabled, Black PLA (not important)