Halloween Tealight Lithophane Collection

These are 80mm diameter spherical lithophanes lit by tealights. There are 4 scenes and two hole sizes (35.7mm and 29.6mm) for the tealights. Each one takes a little over an hour to print (on a Bambu X or P series). I have included both Prusa and Bambu .3mf's with holes for both tealight sizes. 

If you want to make a custom hole size, it's very easy to do. Simply adjust the diameter of the negative volume cylinder on the object screen to whatever size you need for your tealights. 

If you load the models on the plate yourself, you will need to add your own negative volume cylinder. Right click, add negative part, size it for the diameter you want and position it at x0, y0. It should line up with the center of the base.

You may see some messages and warnings about the size of the model and floating regions. This is typical with lithophanes and you can safely ignore them.

Lithophanes generated at www.lithophanemakers.com

Happy Halloween!

-Madmax