Stone Bowl - Vase Mode/Spiralised contour

For commercial license subscribe to my Patreon or Printables Club !    https://Patreon.com/Plastic3D

Bowl with stone texture to be printed in Vase Mode/ Spiralised outer contour mode ( 1 perimeter, 0 top walls, 0% infill).

This provides you acces to the files and the right for PERSONAL USE.
If you'd like to become an authorized seller for Plastic 3D's Models we invite you to subscribe to our Merchant Patreon Tier. 
https://www.patreon.com/plastic3d
This Grants you Commercial Rights usage as long as your Patreon Subscription is active.

A bigger nozzle will provide a better stuctural resistance of the print 0.8-1mm would be ideal.

in case of a smaller nozzle you can manually tune for 2+ perimeters ,0 top walls, 0%infill but it's going to take longer and use retractions.

If you'd like to have it separated into multiple compartiments inside you could try manualy tuning for 

1 + perimeters,( depending on your nozzle)

 0 top layers 

1-5% infill with maybe Grid or Honeycomb pattern

*Model from the picture has been printed with a 1mm nozzle on the anycubic kobra2max in vasemode at 0.35mm layer height