Toothbrush and Toothpaste Holder with Drainage

Holds most manual or electric toothbrushes - up to 28mm (1.1") toothbrush shaft diameter.

Update December 22, 2024:

Added Toothpaste Tube Insert to allow neat storage of your toothpaste with the cap up!  This new insert can be used in any of my toothbrush holder designs that support inserts...

Toothbrush and Toothpaste Holder with Drainage https://www.printables.com/model/618988-toothbrush-and-toothpaste-holder-with-drainage

Double Toothbrush and Toothpaste Holder with Inserts and Drainage https://www.printables.com/model/621767-double-toothbrush-and-toothpaste-holder-with-inser

Swirl Toothbrush and Toothpaste Holder with Inserts and Drainage https://www.printables.com/model/715554-swirl-toothbrush-and-toothpaste-holder-with-insert

See newly added photos.  The Toothpaste Tube Insert can be printed in PETG or PLA and doesn't require supports or any special slicer settings.

--------

Unlike my original Toothbrush Holder, version 3 now also includes a holder for your toothpaste, and the drainage tray is now a concealed, ventilated drainage system.

---------

Update 21 OCT 2023:

• Added photos showing NEW optional Inserts to better hold smaller toothbrushes and to allow personalization via a different insert color
• These Inserts are available via download from my NEW “Double Toothbrush and Toothpaste Holder with Inserts and Drainage” model at https://www.printables.com/model/621767-double-toothbrush-and-toothpaste-holder-with-inser

---------

With other holders that have no drainage, your toothbrush is likely sitting in water that is a perfect breeding-ground for bacteria - yuck!

Some other holders drain right onto the counter-top where you keep your holder - which isn't so great unless you keep it right on the sink.

My design allows water that remains on your toothbrush when you finish brushing to drain into a separate compartment below your toothbrush and toothpaste - where it can slowly evaporate through the 16 drain/ventilation openings!

The provided STL file is intended to be printed in PETG and does not require supports.

PrusaSlicer 3MF files are provided for generic PETG, and G-code files are provided for the Original Prusa MK4.

The Toothbrush and Toothpaste Holder seen in the photos was printed on an Original Prusa MK4 with white Sunlu PETG with a 0.4mm nozzle using Input Shaper at 0.2mm SPEED layer height with 15% Support Cubic infill and a Concentric top fill pattern.

Versions of the 3MF and G-code have been provided with and without Input Shaper (look for "IS" in the filenames for the Input Shaper versions.  Input Shaper (IS) requires version 5.0 firmware on MK4, but prints 45 minutes faster!
 

Be sure to check out my other designs - including honeycomb storage wall (HSW) accessories, universal key covers, and a diverse collection of household accessories and 3D printing tools - on Printables at https://www.printables.com/@PhilCaruso_661446/models