Hydroponic Planting System - Modular

Hydroponic Planting System is a remix is not only my designee, and I think maybe some of you will like and need one 

I have adapted to my designee the pot support and the lock mechanism.

The module has 3x planting spot's with a 3mm wall thickness 

Here is the original from what I used as a reference 

https://www.thingiverse.com/thing:3405964

If you want to ad a water pump in the interion of the module there is a tube/ hose  holder 

Note: I will leave in the description the Version to be more easy to follow if there are some changer

Update :

15.11.2022

• add water_dispencer_module .stp file on request 

10.08.2022

• add water/dirt filtering module
  • you can use sponge ore something what you consider it can filter the dirt what falls down
• add insert in case you want a gap 

02.04.2021

• add 22mm pipe adaptor ( can be adapted also to a bucket
  • there are hole's in case you need to fix it
• Bucket adapter ( 127mm diameter )

03.04.2021

• Add 3mf file ( for this file i used 0.3 draft profile with 100% infill but you can change it if you want )

Ho wants to add a water pump i found on Aliexpress a pump what should be ok for self watering 

https://a.aliexpress.com/_mrormFp

08.04.2021

Add a new Top Lid & Water Dispenser so it can be attached a hose from exterior to not only form interior (in case you make a bigger system and add only one water pump )

 I have made some test with the new top Lid but did not print completely I made some test if the adapter can be screwed in the Lid ( attached dome picture )   

Print instructions

Printer Brand: Prusa

Printer: MK3S+

Rafts: No

Supports: No

Resolution : 0.2 you can try 0.3

• The plant module I made with 0.20 mm Quality Profile ( standard no changes )
• The water dispenser & cap I made with 0.3 mm, I will try with 0.3 also the module

Infill:   at least 20% 

• You may need to use Brim for the 3x_Module because there is a thick area what is touching the bed and the print is big also the print time is long.

Filament :
Prusament PETG > Black  &  White, but i think also PLA will be good

Notes: 
I printed with 3 wall to ensure that there is no leakage