Fursuit head

Bill Of Materials

1. PETG and TPU
2. Flexible fabric for mouth movement. (Can be replaced with a spring or rubber band)
3. Hot glue
4. Foam
5. 2x 5mm screws and nuts (Can be replaced with 3d printed stick and stop)
6. Fuzzy fabric in the colors you want.

Assembly

Print all the parts and glue them together. Also add foam so that the mask gets a good fit.

Mark the base in tape and draw a pattern the way you want it to look.

Glue the pieces on the base. For best results, the pieces should also be sewn together.

Cut the fur to a more suitable length