October 22, 2023
Description
This is an experimental device. Use with caution on your own risk.
Manufacturing instructions:
Material: PETG
3D Printer: FDM 3D printer, average print time 3 hours.
Slicer settings: 0.3mm layer height, 6 perimeters, 60% infill (or more), no supports
Post processing instructions: Connect two wheels and the base using M6 bolt and self locking nut. Attach to the steel rod from the bottom of the concentrator.
License:
Creative Commons — Attribution — Noncommercial
Médecins Sans Frontières
