Whiteboard Hanger

The original aluminum holder were placed on the wrong side of the whiteboard, since i wanted to mount it lengthwise. Still there was no option for non-violent disassembly, that enabled me to reuse the original hangers, so i designed my own. 

Printed in two pieces that can be slid on top of each other, when already placed inside the aluminum profile. Then, a screw can be used to lock the pieces together and into a wall. Differently sized screw holes are available, if you require another size, just shoot me a message. The .3mf contains both, part A and B and can be split to objects in your slicer.

Print Settings:

Material: PETG (preferably, PLA should also work)

Layer_height: Any

Print_Orientation: Any 

There are no further caveats to the printing. It honestly is a simple print.