August 11, 2024
Description
Mount your T818 wheel to the wall or your rig. Insert a quick turn to the right will click it in and lock it in place. To remove, turn the wheel 20 degrees to the left and pull straight out. The notches in the face indicate the lock and unlock position.
Use PLA+ filament.
Print with 3 perimeter layers and 60% adaptive cubic infill.
Must be strong so don't stray too far from these settings.
The separate logo chip should be printed in whatever color the wall mount is, then color change to white. Use a little CA to set it in the middle. Everything clears and works without a problem.
License:
Creative Commons — Attribution — Noncommercial