SEGA Saturn Virtua Stick Arcade Controller (HSS-0136) Mounts

Wall mounts for the SEGA Saturn Virtua Stick Arcade Controller (HSS-0136). I attached mine to the side of an IKEA Kallax bookshelf. 

NOTE: The STL files have the mounts standing vertically, make sure you print them on their side (no support required).

IMPORTANT: if you have rubber pads under your arcade stick like I do make sure you space the printed mounts so they are “on the inside”, between both rubber pads. Mine are spaced where the distance from the center of one mount to the other is 7 3/16" (I used the center of the holes as a reference). PLEASE VERIFY YOUR MEASUREMENTS, or hold your arcade stick upside down to make sure the rubber pads are on the outside of the wall mounts (see picture for example).

I used regular construction Philips screws 3/4in #6 (see picture). I think I predrilled the bookshelf with a tiny drill bit before attaching the mounts but I can't remember for sure.

The cable can be tucked away behind the controller when stored.

Feel free to reach if you have any questions or feedback. Now go play some Dodonpachi!