Remixed "Delta-P fan duct for MK3S extruder" w/clearance for MK3S parts

I printed this in ASA at 100.5% scaling to allow for some shrinkage. using variable layer height

 

I made changes to fix the misalignment of the part cooling fan and the duct/bracket that wraps around the heartbreak, above the hotend. In particular, I flattened out this protrusion: 

, and rotated the top of the part fan away from the extruder, providing more clearance near the extruder motor.

These adjustments also make the shroud entrance connect more snugly with the fan exit.

Please see the original for more details. https://www.prusaprinters.org/prints/12775-delta-p-fan-duct-for-mk3s-extruder/comments