Geberit dual flush button

Finally visible is bottom area of the print - type of bottom fill pattern make different looks. I recommend to use textured print sheet. As visible is mostly bottom side, no need to push printer to high resolution. 

2023 11 01: New version of file uploaded.

This updated version is more lightweight and stronger. It was tested on 0.8mm needle / 0.4 mm print layer / 100% density. Print cost cca 150g of fillament and 3:12 min on MK4. 

Width of this print is 246 mm what is quite near the limits, so carefully place on the plate. 

Bridges (what works as springs) are 27mm - if slicer will protest, adjust bridging speed slightly.  No support needed!

Very large bottom surface of model makes perfect print sometimes tricky, keep constant temperature..

I made it because organic PLA and fraction of original price … enjoy!