November 15, 2024
Description
The STL model is for a Bambu labs printer to use to better dry you filament. The base 250mm x 250mm with a height of 70mm. It is divided into four parts to print. Each has 5 8mm magnets to hold it down and one on each side to hold the four parts together. The center hole is cut to 210mm x 70mm and will fit most spools.
Print in ABS if possible, to handle the heat. My P1S does a beautiful job with it.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
steve smith
