Prusa Mini Y-Axis Bearing Holders

• With these bearing holders, the movement distance of the Z-axis is not reduced
• The Y-carriage sits directly on the bearings, just as it does in the original state
• The bearings do not need to be fastened, as they are locked in place by the y-carriage
• The belt holder for the Y-axis does not have to be changed, which is often ignored
• only 3.4g without bearing, 7g with Igus Igus Drylin RJ4JP-01-08

For the Right Side you need:

4x M3x12 Socket Head Cap Screw

For the Left Side you need:

1x M3x12 Socket Head Cap Screw

1x M3x10 Countersunk Head Screw

Printed with ASA