iPhone 6 Door Stopper

This is a doorstop shaped like an iPhone 6/7/8/SE with a shattered screen.   It's a remix of the iPhone 6+ model created by hpux735.

You may need to scale up the thickness of the wedge, depending on the gap under your door.  The photos show the object scaled down and printed with draft 0.2 mm height.  I was running low on filament :)

I also printed the model with the flat side of the wedge down, and this resulted in the horizontal banding across the face.  To avoid that banding on a FDM printer, orient the model on its right side w/ supports enabled.