October 25, 2023
Description
You can dry this Silicia Spool in your Filament Dryer
Outer Diameter: Ø125mm
Height: 52.6mm
Use the Project files or the Print Instruction below.
load the Model into your PrusaSlicer, select the Part and click “Split to Parts”.
On the right side, you can see the two splitted parts.
Right click on the bottom part and add “Infill” and “Layers and Perimeters”
Click on the new added Configurations, set the Infill to 60% and use Triangle pattern.
Set the solid Bottom and Top Layers to zero.
Set the Perimeter to one.
That's it, just slice!
printed in 0.3mm with PETG
License:
Creative Commons — Attribution — Noncommercial
7
dodasch
