Galaxy Watch Charger with Cable Winder and USB Power Adapter Mount

This is a Remix of the Original Charger with a different opening for Galaxy Watch chargers. The mechanism has been adapted to the cylindrical shape.

Fits for original Samsung chargers as well as 3rd party chargers. Depending on the length of the rubber strain relief (as on the original Samsung charger), the enlarged version might be helpful. I use it with 3rd party charger.

USB-A version only. Contains a Clip for a Samsung Power Adapter.

The clip adapter is the same as on the original, so also those clips can be used. 

Printing:

Both parts of the Winder should be printed in place without any support.

For the Power Adapter organic supports for the two notches are suggested.

Assembly/disassembly:

1. Align the core's cable hole with the ring's cable hole.
2. Feed the cable through all the way, and clip the pad in place.
3. Use the bottom handle to roll the cable up in the case. Keeping some tension on the cable while doing so can help.
4. To disassemble, unwind all of the cable, and pop the charging pad out of place by pushing through the bottom hole.