Adjustable self-watering spike for indoor and outdoor use.
By using a plastic bottle you can provide the garden plants with an adjustable drip irrigation system.
By turning the valve you can adjust and control the drop rate.
Description:
Adjustable Switch, It can be adjusted to provide appropriate water according to different plant needs, can control the velocity of flow, so you don't have to worry about the water being too fast or the hole being blocked.
Easy to use, No dangerous trepanning and trouble preparing work, Just put in the right bottle.
The Plant Watering stakes gives a better air tightness, which makes the water in the bottle not flooded your flower box and killed everything.
Dimensions:
180x39 mm
Ideal for a bottle with 0.5L content
Explanation:
Easy flow control means your plants receive the correct amount of water.
Garden watering device, provide water straight to the plants roots, suitable for most plants.
In combination with a plastic PET bottle
Remarks:
Air hole, please make a hole at bottom of bottle or cut it. It can control the flow rate better
Please post a pic if you print!
Print Settings:
Printer: Prusa Mk3s
Plate: Texture plate
Filament: PETG
Supports: No
Rafts: No
Infill: 20%
Layer height: 0,2mm
How I Designed This:
Using fusion 360
The water spike is designed in such a way that you can easily 3D print it while lying down
The screw tap can be printed separately and has a margin of 0.1 mm
19/07/2022 Watering Spike v3: A lot of people experience the same problem. They like the idea but it's leaking! The screw won't fit the bottles and water leaks. Member 'LilTindemann' suggested to remix it with the screw thread of this print: https://www.printables.com/model/26617-eco-friendly-portable-bidet-v2
06/04/2021 Watering Spike v2: The screw thread for the plastic bottle has been redesigned with standard PCO -1881 dimensions. Watering Spike v2: Was fitted with an o-ring to prevent water leakage.
3Dplanner.be
