Case for LPV 60 24 Meanwell Powersupply

A simple case for LPV 60 24 Meanwell Powersupply for a standing installation to use the convection effect for cooling. Don't disturb the air flow of the slots in the case. It might be a good idea to print it in flame retardant PET. Check the temperatures during operation of the powersupply with the real load connected

Mains voltages can be lethal. Use at your own risk. 

4x M2 5mm DIN 912 screw 
4x M2 D3,5-L3,6 hot melt nut

2x D03-08-0406 hot melt nut 
2x M3 5mm DIN 912 screw 

2x PG-7 cable gland 
1x  Switch 12,2x19,2mm

2 wood screws to fix the case on a shelf

Print: Add manual supports for the big holes. The rest should print without supports. Put the seams of the layer change on the inside of the case.