October 26, 2023
Description
This is made for the new Google Pixel Watch 2 charger. This will not work with the first version Pixel charger. The insert for the charger puck is snug, press firm to seat the puck into the receiver so that it will be steady for placing the watch.
I recommend printing the stand in the upright position so the base is on the plate. You will need supports under the curved charging area only to support while printing. I found organic supports to work the best.
The part shown was printed in white PLA .2mm with 15% infill.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
eroedig
