Join the EnderXY community on Reddit:
https://www.reddit.com/r/EnderXY/
Uploaded: November 4, 2023
Reverse engineered CAD model for the EnderXY. Printer was dissasembled and each part measured and printed to compare for maximum accuracy, though it won't be 100% accurate as I don't have the original CAD model.
The only thing I didn't add was the spring nuts.
If you find any errors please let me know so I can re-measure/print that part and verify it.
Edit: The backplate to mount the hotend seems to be correct for the first batch only.
Update v1.0.03:
- Added 2 missing screws.
- Fixed minor issue with bed positon.
Update v1.0.08:
- Added 4 missing screws.
- Fixed a minor issue with Z alignment on lead screws.
- Remade the Z motor brackets to match the EnderXY ones.
Update v1.0.10:
- Fixed misaligned hole on “Rear Upper Brace”.
- Fixed a measurement on “Rear Upper Brace”.
Update v1.0.11:
- Fixed misaligned hole on “Rear Upper Brace”.
Update v1.0.17:
- Fixed length of the lead screws (now 290mm).
- Fixed minor measurement on "Belt Tensioner Mounting Plate" holes.
- Fixed minor measurement on the belt tensioner inner bracket.
- Cosmetic fixes on belt tensioner handle to correctly match stock.
Update v1.0.18
- Fixed the centre hole on the “Rear Upper Brace”.
Update v1.0.26
- Fixed misaligned holes on “Rear Lower Brace”.
- Fixed two misaligned holes on “Bottom Plate”.
Update v1.0.27
- Fixed misaligned hole on “Rear Upper Brace”.
I'm not affiliated with belt3dprinterkit.com or Aditiva3D but I wanted to see the community and support for the EnderXY grow.
The core parts to the EnderXY are made from aluminium and are easy to bend/strip a thread so this will allow people to recreate/repair/improve the EnderXY.
If you'd like to support my work you can here https://ko-fi.com/supavitax
Supavitax
