BMW e30 wallart - 41 cm

This two-part silhouette is a version of the model: 

https://www.printables.com/model/598728-bmw-e30-2d-wallart

It's a piece that has been very well-received, and you've asked for a modification to print it larger, so here we go. The model consists of several files:

• P1: First half of the car
• P2: Second half of the car
• Connectors: A total of 7 to easily guide and join parts P1 and P2.
• Tolerance test: We've set a tolerance of 0.15 that works well for us, but if you want to try it before printing the entire car, you can use this file. 

Once both parts and connectors are printed, if you want a permanent attachment, we recommend using glue.

The total length of the car in this case is 410 mm, and each part fits within beds of 220mm x220 mm.

GENERAL PRINTING SETTINGS:

• Nozzle diameter: 0.4 mm
• Layer height: 0.25 mm
• Perimeters: 3
• Top and bottom solid layers: 4
• No supports

**************************************************************************************************

All Quimicafeina designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell or distribute any digital files or reproductions from those files.

If you are interested on exclusive content, you can support us on patreon.