Tamping Station for Delonghi EC 685 51mm Portafilter Tamper

After a few interations this model did well during testing. 

Especially when using only one hand for tampering, the portafilter is not stable when pressing down, so a solution must be found.

For my portafilter the fit is quite snug. If you want a more snug/loose fit, or your portafilter has slightly different dimensions, you may scale the model slightly.

The model is based on a own design for a different aftermarket 51mm portafilter, which may will be finalized and uploaded soon.

Here is a hexagon version: 
https://www.printables.com/model/750547-hexagon-tamping-station-for-delonghi-ec-685-51mm-p

To remove the filter from the holder, just use ur thumb to lever against the holder and pull the filter up.

Printed on Anycubic Kobra 2 Pro.

0,4mm nozzle; 

0,2mm layer;

eSun PLA+ black; bed 70°C, printing 220°C (pictures)

eSun PETG black, bed 85°C, printing 240°C (in action now)