Motor & TriangleLab filament runout sensor supports on D=8mm rod

Supports and flanges for extrusion motor & for TriangleLab filament runout sensor on the same triangulation rod D=8mm (from Liar/David Dal, Stan 42, Bezain & Co...) for the Dagoma DiscoEasy and DiscoVery or other machine.

BOM:

• 8 x M3x8 screws
• 2 x M3x14 screws(provided with the filament runout sensor)
• 3 x M3x25 screws (motors mount)
• 10 x M3 nuts

End of filament runout sensor from TriangleLab (with wheels for very smooth movement, and the possibility of mounting several identical detectors in parallel - see the last 3 images on this subject for the electrical wiring):
 https://www.aliexpress.com/item/Trianglelab-filament-runout-sensor-3D-Printer-Part-Material-detection-module-1-75mm-filament-detecting-module/32829808063.html

Standard Dagoma extruder or other extruder.

FYI, I have been using Dragon-Shark (v2) extuder which gave me satisfaction for over 2 years. It is available here (to print flat with supports): https://www.lesimprimantes3d.fr/forum/topic/3697-impression-flexible-sans-direct-drive/

Print Settings

Printer:

Disco Z122

Rafts: 

No

Supports:

Yes

Resolution: 

100 ou 200 um

Infill:

33% avec mur de 1.2 mm

Category: 3D Printer Parts