NEW! AMS-X Stand for all AMS units

NEW VERSION supports both AMS stand types

I have a new version that supports both AMS (4-slot and 3-slot) stands. Please go to 

https://makerworld.com/en/models/51650#profileId-53374

to learn more.

I know I wanted an AMS stand to free some room on my desk and after reviewing every stand I could find, I realized I'd need to build one myself. BUT… I did find one that was close to what I wanted. It's the AMS stacking stand for P1P and X1 by MihaiDesigns.

I really liked the way the top of the stand fit snuggly into the bottom of the AMS. I didn't like the fact the back wasn't there and you had to purchase metal tubing and fasten it yourself if you wanted it sturdy. Also, I knew I wanted a different look for the stand as well.

So, in Blender, I cut off everything but the mounting teeth on top. I then created a different design but kept the same height and same dimensions. I next added a back brace to make it as sturdy as possible. Everything is ready to print in the 3mf including 4 hand-tightened bolts and the X-brace internal screw bolt. There are spring clips designed to work in PLA that reinforce the X-brace. There are some finger notches in the bottom to make it easy to lift the whole thing with the AMS.

Print in PLA with no supports.

I should mention there is a test print (see plate image above) so that you can test to see if the “teeth” will fit properly in your AMS. Might be a good idea to print it out.

Had a lot of fun making and printing it.