April 21, 2024
Description
A Two Piece Rotating Table to help with painting models.
No bearings needed, prints without supports. (approx 4 to 5 hrs on a Ankermake M5C , 10% infill). (Appears to be sturdy enough)
can be used as a display.
Sizes : -
Top Plate/Table is 150mm x 150mm x 5mm thick.
Overall Height is 110mm
Base is 85mm x 85mm x 5mm thick
Addition 7 NOV 2023
Link to Table top Cover in case you want to change the colour of the top without reprinting the whole thing or just want to use it as a cover for when painting.
Model Turner Table Top Cover by Peter Martin | Download free STL model | Printables.com
Addition 14 November 2023
Link to Version 3 :-
Model Turner Display Stylised by Peter Martin | Download free STL model | Printables.com
Dec 2023 - added a 200mm Table Top Cover, not sure if it works properly (it will fit, but balance may or may not be ok, but its an option for anyone that wants a bigger table top only.
APRIL 2024 UPDATE : MT VICE - ROTATE & TILT New Model Painting Vice
A much improved vice with a single winding arm, tilt and rotate your model as you work.
License:
Creative Commons — Attribution — Share Alike
6
Peter Martin
