Tweaked Sweep Compact case

This is a case that was designed to fit around the pcb that benvallack designed based on the ferris sweep. I wanted something that would protect any tabletop from the pins that stick through the bottom after the components are soldered on.

Overall the case adds 2mm around the edge of the pcb and 2mm to the overall thickness. The provided 3mf file is for the left half. To get the right half, just mirror the case in your slicer.

Here is a link to ben's github page for the pcbs: https://github.com/benvallack/Ferris-Sweep-Tweaked/tree/main

Print Settings

• Infill: 20% Gyroid
• Perimeters: 2 (can also do 3)
• Layer height: 0.2mm
• Supports: none