Helios - LED Desk Lamp

I had a bunch of leftover LED strip scraps from another project and wanted to make a fun lamp for my desk. 

If you want to build one of these, you'll need:

• Black and transparent filament (I used PETG)
• 1 Wemos D1 Mini or other ESP8266 Board flashed with WLED
• WS2812B LED strip cut to size (a length of 62 pixels from a strip with 60 LEDs/m is ideal)
• Some wire to solder the ESP to the strip
• A micro-USB cord for power

I have only a Prusa i3 Mk3, so I needed to split the lamp model and diffuser ring into quarters to print. If you have a printer large enough to print the entire exterior lamp base as one piece, I think that's ideal. I ended up needing to shave off a bit of the last diffuser in order to fit it inside the assembled ring. I think assembling the diffuser ring first, and then snapping the lamp around it is probably the way to go, but I was too lazy. I ended up not needing any superglue, it's stable enough on its own to function as a desk lamp. Printed in Overture black/transparent PETG. Supports needed throughout. I found printing the diffuser on its side provided the most consistent look, but let me know if you figure out a better way.