Turn your Atmos pump into a unique work of art!
Printing instructions
- balloon.stl
- Nozzle size: 0.2
- Layer height: 0.2
- Perimeters: 2
- Color change: white → black on layer 5, black → red on layer 10
- Supports: printed with supports because balloon is hollow for better illumination
- cap_top.stl
- Nozzle size: 0.2 (0.4 will be ok too)
- Layer height: 0.2
- Supports: no needed but remember to flip model upside down
- cap_bottom.stl
- Nozzle size: 0.2 (0.4 will be ok too)
- Layer height: 0.2
- Supports: a lots of supports :)
Assembly instructions
- Place the middle part (balloon.stl) into the slot on the bottom cap
- Glue cap_top.stl on top
- Enjoy your artistic Atmos pump cap :)
@
License:
Creative Commons — Attribution
WojtekM
