December 24, 2023
Description
https://www.youtube.com/channel/UCBjyI1E1HROh1BAYgeRZy7g
Support my work: (click on image)
https://www.buymeacoffee.com/savagelau
You can get commercial license from here: (click on image)
https://www.patreon.com/SavageLau
______________________________________________________________________________________________________________
Okay, I spent few days working on design, test print, make improvements, and run test again. This is a good revision I think. So I want to share with you guys. BTW, I also made a Creality K1 version of this riser with very similar(same) design.
I made a instruction video for this design, briefy explain the features:
There are two models: Singed and Plain. Pick whatever you like.
There are total of 4 pieces, you will need to break it apart on slicer and print it. They are connected with joints like these: Man, the joint is takes so long to get the perfect tolerance, but I made it. I have tested it with PLA, PETG, and ABS. they are all work fine, tight fits for most, if your printer work right. If you are printing with PETG, You might need hammer it fit!
Suggest at least print PETG, PLA might deform overtime if you put AMS on top of it.
There are total of 6 air ducts for better ventilation when you printing PLA filaments to prevent heat creep and nozzle clog.
When you printing ABS, CF and others requires higher ambit temp, you can close the shutters.
Open it up when you needed.
More over! You can DIY and modify the logo, text, and style on the shutter. I already made some so you can download and use it, I also included STEP file for the shutter. You can download shutter here:
Shutters is very easy to install, just put one side of the pin of the hole, then, bend the shutter and slide other side in.
Old revisions:
V1.1:
V1.2:
V1.3:
V1.4:
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
7
SavageLau
