Magnetic LTT Screwdriver Case With 44 Bit Holders

Description of the original model

This LTT Screwdriver Case Is designed to fit 1/4" Screwdriver Bits, either 20mm or even normal full-size bits will fit snugly and securely thanks to a slight taper near the top of each bit holder which provides enough force to hold the bits securely while still being removable with ease. Not only can you have the bits upside down, but you should in order to make use of the 44-bit holders, 24 of which are on the bottom and 20 of which are built into the lid.

This case is held together with the help of 12 6x2mm neodymium magnets. There is also a divider wall that allows for a place to store loose screws so that you don't lose them. The screwdriver case is available in either Black or Orange for both the top and the bottom.

Why I remixed the design

Changed the fillet on the lid to a small chamfer to allow easier, higher quality printing without supports. I had issues getting a clean print with PETG befor the remix. With the small chamfer instead it printed beautifully on the first try  All around a great original model.