Lamp / bulb holder Monitor VESA 75 / 100 mount Hue e27

This is a VESA E27 lamp holder designed for 3D printing. It is made of PLA plastic and is compatible with any VESA 75 / 100 mounting plate. The holder is designed to hold a standard E27 light bulb the hole for the lamp is 40,5mm and can be used to create a variety of lighting fixtures.

The holder is easy to print and assemble. The design is simple and straightforward, making it a great project for beginners.

Here are some of the features of the VESA E27 lamp holder:

• Compatible with VESA 75 / 100 mounting plates
• Holds a standard E27 light bulb
• Easy to print and assemble
• Simple and straightforward design

Here are some of the instructions for printing and assembling the VESA E27 lamp holder:

1. Print the holder using PLA plastic. The print settings are not critical, but a layer height of 0.2 mm is a good starting point.
2. Once the holder is printed, remove it from the build plate and clean it up.
3. Attach the holder to the VESA mounting plate using the screws provided.
4. Screw the light bulb into the holder.

The VESA E27 lamp holder is a versatile and easy-to-use way to add lighting to your home or office. It is a great project for beginners and experienced 3D printing enthusiasts alike.