PC RAM cooler

I made this little cooler to lower my PC RAM modules temperatures. Fits DDR5 and DDR4 (motherboard RAM slots distance vary so this maybe not fit your model…) You only need to buy 40x40x10mm fan (I used Noctua NF-A4x10) and glue two parts together.

Assembly instructions:

• Glue “Cooler base” and "RAM clip" together
• Remove fan cable from shroud and guide it to middle and out of “Cooler base”
• Use screws, glue or two sided tape to attach your fan
• Lastly put “Fan case” around fan just for looks
• Attach cooler to RAM modules by aligning slots in part “RAM clip"