Adjustable Swivel and Tilt Pi Cam Mount

I was using richardjm's corner mount (found here: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/richardjm/picam-corner also uploaded by DeVsFaN1830 found here: https://www.printables.com/model/526647-raspberry-pi-camera-module-3-corner-mount-voron-v2) but I couldn't really get the angle I needed for my Voron Trident, so I figured it was time to make up my own that had all the options I wanted. As stated in the title, this mount can both swivel and tilt!

This model consists of 3 printed parts, 1x 16x3mm and 1x 20x3mm screws along with 2x 3mm heat inserts with a way to mount to your 2020 extrusion. 

Be mindful that when the parts are loaded onto your slicer, they sit pretty strangely. Just orient them the way I have shown in the photos and you shouldn't need any supports.