November 6, 2023
Description
The front panel is designed with a split configuration, divided into two halves, making it possible to print on smaller printers such as the Ender 3. There are three available versions of these front halves: one with a single cutout, another with two cutouts, and a third one that's blank with no cutouts. These two halves can be fastened together using two M4 screws and nuts. The Pi's are mounted onto dedicated holder frames using M2.5 standoffs. These holder frames are then affixed to the front plate using two M4 screws and nuts.
Hardware needed:
License:
GNU General Public License v3.0
10
Irgendeintyp
