Prusa XL series: Turnable Nozzle size label (snap in place)

I saw the Nozzle Size clips from GuyH, but i didnt like the idea of having 20 Clips. So i made a turnable nozzle label. Works with the 6 available nozzles from Prusa, so i only made this version. This version features a snap in mechanism , so that tthe selected nozzle size dont get turned to a different number. Could have made this easier, but wanted to test out the spring mechanism i had in mind, since watching the smallest nerf gun video from mark rober about compliant mechanisms.

IMPORTANT: The File containes Support parts for the springs to be used as soluble support or the combination of PLA/PETG or vice versa as supports. 

All number characters can be changed in colors, for thos who like the colors of the Revo nozzles.
The Top 2 middle parts are needed for the whole construct to not wiggle around.

This turnable label marker needs to be printed with a 0.25mm nozzle . It was designed this way, since there is not enough space at this position to use more perimeters


Have fun!

After many asked me how they could support me, you can now 

Tip me on KO-FI by klicking here:

                                                      https://ko-fi.com/surfalex2000

Check out my other optimized XL Parts! There is a Series to come!

You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114