November 2, 2023
Description
A remix of the cover lid of asjolund's Logitech StreamCam cover for non multicolor printer.
I printed with these settings:
I used 6 top and bottom layers, so no infill is required.
Step 1 For a smooth surface and better adhesion, the printed model can be carefully grinded directly on the PEI plate. Remove the printed model carefully from the plate (dont remove the adjustment supports which are connected to the model yet). | |
Step 2 Glue it on the cover lid. | |
Step 3 Remove the adjustment supports with a scalpel.
|
License:
Creative Commons — Attribution — Share Alike
s7emar
