Snap-In Silica Gel Container for Prusament Spool (with Hygrometer)

Yet another silica gel container …

What makes this design better than many existing ones:

• snaps into Prusameter spools,
• easy removable,
• hygrometer is separated from the silica gel for better accuracy,
• easy and quick to print without a lot of travel movements and stringing.

How to print:

This container is designed for a line width of 0.4mm and a layer height of 0.2mm. The lid must be printed from a flexible filament - PETG works well. PLA is not suitable as the small snaps will break. Print in the specified orientation. No support required.

How to assemble:

The 2 snappers of the hygrometer must snap into the 2 ventilation windows of the lid, see picture above and video below.

Requires one of those cheap hygrometers you find on Amazon or Aliexpress, for example here.