Prusa XL series: Nozzle Change tool / Hotend clip

Inspired from the Prusa Mk4 Hotendholder, i thougt, that it would make sense to have it  also for the XL. Its not possible to port it from the MK4, so i had to begin from scratch. But this is not as simple as i thought. 
This version is to slide in from the “back” . Important to know. This version work only without silikon sock.
Also all Hotends that you use with this slide in holder, must initially be positioned for the mount. This is important to not bend the tube. Also the nozzle must be screwed in while in position with the mount.
 After screwing in the nozzle, please remove the mount, and push the nozzle all the way in

After many asked me how they could support me, you can now 

Tip me on KO-FI by klicking here:

                                                      https://ko-fi.com/surfalex2000

Check out my other optimized XL Parts! There is a Series to come!

You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114