Hanging Hook 02

Here is a simple and small hanging hook.  I've designed the hook to use use two screws to prevent rotation and movement.  I also use this same hook with double sided tape instead of screws for an effective hanging hook.

The hook is optimised for two 3.5mm countersunk screws, typically 15mm in length.

My print is made in 1.75mm eSUN PLA Plus filament, with 0.2mm layer height and 15% infill on a PRUSA I3 MK3S printer.  I placed the part on its side on the print bed, hence needs print supports.

I hope you can find this print useful, too.