Magnetic Tool Strip (for different magnet sizes)

This is a magnet bar to hold magnetic objects. Due to the small magnets do not expect it holds your big kitchen knife…
I use it to hold some of my aquarium accessories.

I have 2 versions, one with two screw holes and one with three. I printed the 2 hole version and I realized that it bends to much when stick things to it. I added doubled sided tape to fix this. 
If this is not an option for you, then use the 3 hole version.

You need 2 (or 3) counter sunk screws and 11 (or 10) round magnets with dimension 6x2mm.

UPDATE 7.11.23: I added a version with big magnets. You need 5 25x3.5mm or  25x3mm magnets, depending on which version you choose. Probably it is a idea to add double sided type, like for the small magnets 2 hole version

Print instructions

• print in orientation as the model is
• perhaps use no ASA and other material that shrinks, or scale it to compensate that

Assembly

• push in the magnets. 
  • To align polarity I made a stack of the magnets (see picture )
  • tolerance is tight, so you have to push hard enough
• screw this to your door/wall/… 

See also my other fish tank stuff: https://www.printables.com/@Antimaterie/collections/973165

Additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.