Elden Ring Coasters

Update 12/12/2023 - Added the Raya Lucaria coaster & the Carian/Crystalian coaster.

Update 12/5/2023 - Added the Cleanrot coaster.

Update 11/29/2023 - Added the Two Fingers coaster.

Update 11/16/2023 - Added the Ancient Erdtree, Omen Shackle, & Haligtree coasters.

Update 11/14/2023 - Added the Erdtree coaster.

Update 11/9/2023 - Added the Golden Order coaster and created the “Faction” folders.

Update 11/6/2023 - Added the unique version of the Elden Ring found in Maliketh's boss room at Farum Azula.

You may have all of the Great Runes to re-forge the Elden Ring, but how will you let people know without booting up the game? Well, now you can display each badge of triumph against the demigods with this set of powerful coasters, each one in perfect likeness of the fabled Great Runes (mostly). Assuming your power is great enough, you may even display the newly re-forged Elden Ring in your collection!

Note

If you want to make an ornament out of any of these coasters, just follow these instructions. (in Prusaslicer)

1. Go to the part list on the right-hand-side & right click on the object you want to modify
2. Go to “Add Negative Volume" and select “Cylinder”
3. Move the cylinder to the desired location, scale to the right size, and slice the model

Done correctly, there will be a small hole in the top of the model from which to tie a string or ribbon.

Print Settings

• Layer Height – 0.2mm
• Material – PETG, PLA, or other
• Infill — 15% Honeycomb
• Perimeters – 2
• Top/Bottom Fill Pattern – Octagram Spiral
• Detect Thin Walls &/or Extra Perimeters – Optional – Some of the coaster designs may benefit with these settings on or off, please observe the difference within your slicer preview.
• Perimeter Generator - Check the difference between Arachne & Classic for the best desired results
• Ironing – Optional (If you want your coasters to look cleaner, smoother, & more crisp)

There are two versions of each coaster, please note the difference in your slicer.

Colors & Layers

• Layer Height 0.0-2.6 — Color 1
• Layer Height 2.8-3.0 — Color 2
• Layer Height 3.2-5.0 — Color 1 (you can change this to a third color if you want)