The Backrooms - Logos, Badges, Emblems, and Plaques

'The Backrooms' is one of my favorite video curiosities, and as such, I decided to find, design, and print logos, door plaques, and badges. I uploaded a few photos of the designs that I ended up printing as of post, but some of them I have no yet made.

During my search for logos and such, I found a few different designs for 'The Backrooms', but the majority of them used the one that I have included. The 'A-Sync Foundation' logo is pretty standard, and no other variations were found as a result.

While I didn't use anyone's specific designs on Thingiverse (I found the Logos online, converted them to SVG Files, then uploaded them to TinkerCAD), I did take inspiration from a design that I found here - You can find their design here.

The*'The_Backrooms_Warning_Sign.stl'* 3D Models are very, very large - I designed them this way to allow for more customization, so make sure to scale these down to whatever size you wish.

Note:The font used for 'The Backrooms' is called "Alien Encounter" found on DaFont.com.

----------------------------------------------------------------

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

No

Resolution:

0.16mm

Infill: 

20%

Filament: Doesn't Matter PLA or PETG Doesn't Matter

Notes:

For the designs with the 'Alien Encounter' font, I would recommend a Resolution of 0.16mm or less since the font uses thin, horizontal lines. The rest of the prints can use 0.16mm or higher - I used 0.2mm for most.

Category: Signs & Logos