Yin Yang Planter (self-watering)

This yinyang inspired planter comes with water-level indicators and enough space for one or two plants. 

If your water level is out of balance, simply refill through the water-level indicators and watch them rise.

Water-Level indicators consist of two parts, the top-part indicates the water-level, while the lower-part will act as a swimmer. Depending on your printer you might want to coat the bottom part with a thin layer of epoxy to make it air/watertight. 

I've designed the indicator so you can use a piece of straight 1.75mm filament to connect both parts. Alternatively you can simply use a wooden stick from your last bbq. (up to two mm in diameter).

To print the complete set, you need to print each part twice.

If you enjoyed this print, consider becoming a supporter through my club membership. ;-)